Collision-induced Dissociation Process Research Articles

Oxidized and Reduced Dimeric Protein Complexes Illustrate Contrasting CID and SID Charge Partitioning.

Charge partitioning during the dissociation of protein complexes in the gas phase is influenced by many factors, such as interfacial interactions, protein flexibility, protein conformation, and dissociation methods. In the present work, two cysteine-containing homodimer proteins, β-lactoglobulin and α-lactalbumin, with the disulfide bonds intact and reduced, were used to gain insight into the charge partitioning behaviors of collision-induced dissociation (CID) and surface-induced dissociation (SID) processes. For these proteins, we find that restructuring dominates with CID and dissociation with symmetric charge partitioning dominates with SID, regardless of whether intramolecular disulfide bonds are oxidized or reduced. CID of the charge-reduced dimeric protein complex leads to a precursor with a slightly smaller collision cross section (CCS), greater stability, and more symmetrically distributed charges than the significantly expanded form produced by CID of the higher charged dimer. Collision-induced unfolding plots demonstrate that the unfolding-restructuring of the protein complexes initiates the charge migration of higher charge-state precursors. Overall, gas collisions reveal the charge-dependent restructuring/unfolding properties of the protein precursor, while surface collisions lead predominantly to more charge-symmetric monomer separation. CID's multiple low-energy collisions sequentially reorganize intra- and intermolecular bonds, while SID's large-step energy jump cleaves intermolecular interfacial bonds in preference to reorganizing intramolecular bonds. The activated population of precursors that have taken on energy without dissociating (populated in CID over a wide range of collision energies, populated in SID for only a narrow distribution of collision energies near the onset of dissociation) is expected to be restructured, regardless of the activation method.

Collision-Induced Fission of Oblate Gold Superatom in [Au9(PPh3)8]3+: Deformation-Mediated Mechanism.

Collision-induced dissociation (CID) patterns of the phosphine-protected Au-based clusters [PdAu8(PPh3)8]2+ (PdAu8) and [Au9(PPh3)8]3+ (Au9), featuring crown-shaped M@Au8 (M = Pd, Au) cores, were investigated. For PdAu8, ordinary sequential PPh3 losses (PdAu8 → [PdAu8(PPh3)m]2+ + (8 - m)PPh3 (m = 7, 6, 5)) were observed. In contrast, Au9 underwent cluster-core fission (Au9 → [Au6(PPh3)6]2+ (Au6) + [Au3(PPh3)2]+ (Au3)) upon sufficiently high energy collision, associated with splitting the number of valence electrons in the superatomic orbitals from 6e (Au9) into 4e (Au6) and 2e (Au3). Density functional theory calculations revealed oblate and prolate cores of Au9 and Au6 with semiclosed superatomic electron configurations of (1S)2(1Px)2(1Py)2 and (1S)2(1Pz)2, respectively. This result indicated a significant deformation of the cluster-core motif during the CID process. We attribute the clear difference between PdAu8 and Au9 to the softer Au-Au bond in Au9 and propose that the collision-induced structural deformation plays a critical role in the fission.

Full-dimensional quantum mechanical study of three-body recombination for cold 4He-4He-20Ne system.

The increase of the number of the two-body recombination channels strongly challenges the numerical calculation of the accurate rates for the three-body recombination (TBR) process and its reverse process, collision-induced dissociation (CID), at ultracold temperatures. By taking the 4He-4He-20Ne collision system as an example, we have obtained the rates for its TBR and CID processes involving all four recombination channels, including the two-body states 4He2 (l = 0) and 4He20Ne (l = 0, 1, 2) with l the rotational quantum number. By using the adiabatic hyperspherical method, we have considered not only total angular momentum J = 0 but also J > 0 in the ultracold collision energies (E = 0.01 - 100mK × kB). It is found that 4He2 (l = 0) is the major product after the TBR process in the ultracold limit (E ≤ 0.1mK × kB). The TBR rate into 4He2 (l = 0) is nearly one order of magnitude larger than the sum of the other three products, 4He20Ne (l = 0, 1, 2). Moreover, the CID rates for the three 4He20Ne (l = 0, 1, 2) + 4He initial states are close to each other and are smaller than that for the 4He2 (l = 0) + 20Ne initial state. Additionally, we have, for the first time, performed the channel-resolved scattering calculation that can explain the above-mentioned findings quantitatively.

Synchronized Reverse Scan Collision Induced Dissociation in Digital Ion Trap Mass Spectrometer for Improving Fragment Ion Detection

Development of fragment ion detection methods is of great importance for mass spectrometer advancement or substance identification. To date, collision induced dissociation (CID) remains the most commonly used ion activation method in MS/MS experiments, and the effectiveness of CID in an ion trap mass spectrometer is limited by low mass cutoff and weak fragmentation yields. Theoretically, controlling the q value is the key to maintain the fragment efficiency and trapping efficiency of MS/MS, thus improving the detection of fragment ion, while currently reported techniques usually require complex circuitry and often produce different CID patterns. In this paper, with the developed synchronized reversed scanning-collision induced dissociation (SRS-CID) technique, we demonstrate its effective improvement in fragment ion detection. The SRS-CID is implemented on a digital ion trap mass spectrometer (DITMS) by reverse scanning the q values during CID process, or specifically, the frequency is increased during the CID process. With the SRS-CID technique, the fragmentation efficiency of precursor ions can be slightly improved. For reserpine analyte, the trapping efficiency for low-mass fragment ions is improved at least 3 times, and for YGGFL, the trapping efficiency for low-mass fragment ions is improved at least 9 times. These experimental results can also be validated by simulations, and the kinetic energy variation plot suggests consecutive fragmentation occurs. In any case, the SRS-CID provides a solution to the low efficiency of fragment ion detection during tandem MS analysis, which will certainly be useful in the future.

Three-Body Recombination of Cold 3He–3He–T− System

The atom-atom-anion three-body recombination (TBR) and collision induced dissociation (CID) processes of the 3He–3He–T− system at ultracold temperatures are investigated by solving the Schrödinger equation in the adiabatic hyperspherical representation. The variations of the TBR and CID rates with the collision energies in the ultracold temperatures are obtained. It is found that the JΠ = 1− symmetry dominates the TBR and CID processes in most of the considered collision energy range. The rate of TBR (CID) into (from) the l = 1 anion is larger than those for the l = 0 and l = 2 anions, with the l representing the rotational quantum number of 3HeT−. This can be understood via the nonadiabatic couplings among the different channels.

Why tandem mass spectrometry for trace analysis: Concepts of tandem analytical techniques.

The triple quadrupole mass spectrometer, typically in combination with a gas or liquid chromatograph (GC/MS/MS and LC/MS/MS), is perhaps the most iconic example today of a tandem analytical instrument. Here I present the concepts of tandem or hyphenated techniques for trace analysis (that is, the detection and/or quantitation of one or more analytes present in a mixture at low levels). This tutorial presents the principles of tandem trace analytical techniques such as GC/MS/MS and LC/MS/MS, including the capabilities and requirements for such tandem techniques, the role of sensitivity and selectivity in tandem techniques, ways to assess the "informing power" of these techniques, and a comparison of tandem techniques with individual techniques at high resolution. These points are illustrated with several examples of trace analysis using tandem analytical techniques. Several characteristics of the triple quadrupole have made it the "laboratory workhorse" for trace analysis, including the remarkable efficiency of the low-energy collision-induced dissociation (CID) process in a radiofrequency (RF)-only multipole collision cell, the ease of computer control, and the capability for rapid scanning, rapid switching from mass to mass, and high transmission efficiency, enabling a wide variety of MS/MS scans. The efficiency of selected reaction monitoring means that triple quadrupoles dominate MS/MS for detection and quantitation of targeted compounds. This special issue addresses the intriguing question of how the triple quadrupole mass spectrometer progressed from "bleeding edge" to "the laboratory workhorse" over the last 40 years. This tutorial on the principles of tandem trace analytical techniques provides perspectives and insights into answering that question and should help educate the novice and stimulate the sophisticate.

Characterization of nitrogen-containing compounds in coal tar and its subfractions by comprehensive two-dimensional GC × GC-TOF and ESI FT-ICR mass spectrometry based on new separation method

The molecular composition and structure of heavy oil and the subfraction have always been one of the most controversial topics despite the continuous improvement of detection and analytical methods. In this contribution, the composition and structure of nitrogen-containing compounds (NCs) in middle and low temperature coal tar (MLCT) and the subfractions are studied by GC × GC-TOF MS and ESI FT-ICR MS coupled with collision-induced dissociation (CID) through isolating a narrow window of mass-defined ions based on the developed MLCT subfraction separation method. It is found that the new separation subfraction method combined with high resolution mass spectrometry is efficient to detect the characteristics of each fraction at the molecular level. Eighty nitrogen compounds, dominant of quinolines, carbazoles and pyridines are identified in MLCT. The distribution laws of compound classes, carbon numbers, DBE are obtained with reasonable representative molecules for aromatic, resin and asphaltene. The qualitative analysis shows the island and archipelago structural motifs coexist in MLCT and the island-type is the predominant structure in aromatic (94%), resin (86%) and asphaltene (80%). The archipelagic structures in large molecules are more abundant. Meanwhile, the heterolysis mode is the predominant bond cleavages path for MLCT molecules and the proton transfers reactions occur during CID process.

α-Active Pyrylium Salt 2,4,5-Triphenylpyrylium for Improved Mass Spectrometry-Based Detection of Peptides

Pyrylium salts are considered efficient chemical tags for amino groups. However, the apparent steric selectivity of pyrylium salts limits their application in the field of chemical labeling, especially during the labeling of sterically hindered compounds like amino acids, peptides, and proteins. Herein, we have investigated the effects of the α-substitution of pyrylium salts on their reactivity. We have also investigated the mechanism of nucleophilic reactions with pyrylium salts and further proposed that the reactivity of pyrylium salts mainly depends on the position and type of their substituents. A series of pyrylium salts were synthesized, and a highly active α-monosubstituted pyrylium salt, 2,4,5-triphenylpyrylium, was developed for efficient chemical labeling. All of the 15 amino acids studied were efficiently labeled under optimized reaction conditions. The 2,4,5-triphenylpyrylium salt was highly efficient in comparison to the previously reported 2,4,6-triphenylpyrylium salt developed for lysine-specific modifications. Furthermore, we successfully used 2,4,5-triphenylpyrylium salt for the hydrophobic labeling of peptides and protein hydrolysates. The most striking observation was that the ionization efficiency of short-chain multilabeled peptides in mixed samples, after derivatization, increased by up to 60 times. The increase in ionization efficiency gradually decreased with increasing peptide chain length. During the "soft" collision-induced dissociation (CID) process, the peptide was tagged at the N-terminus with 2,4,5-triphenylpyrylium, producing abundant a-type ions and b-type ions (Δ = 28), which eases the peptide resequencing process and assists in cracking the peptide codes. Moreover, 2,4,5-triphenylpyrylium has been utilized for the proteomic analysis of HeLa cell digests. In addition, 215 additional proteins were identified in the labeled products and the coverage of most proteins was improved.

Structure and collision-induced dissociation of the protonated cyclo His-Phe dipeptide: mechanistic studies and stereochemical effects

The role of stereochemical factors on the structure and the fragmentation paths of the protonated cyclic dipeptide cyclo histidine–phenylalanine is studied under ion traps conditions by combining tandem mass spectrometry, laser spectroscopy, quantum chemical calculations and chemical dynamics simulations. Vibrational spectroscopy obtained by Infrared Multiple Photon Dissociation (IRMPD) reveals a small difference between the two diastereomers, c- $$\hbox {LLH}^{+}$$ and c- $$\hbox {LDH}^{+}$$ , arising mainly from ancillary CH... $$\uppi $$ interactions. In contrast, there is a strong influence of the residues chirality on the collision-induced dissociation (CID) processes. Chemical dynamics simulations rationalize this effect and evidence that proton mobility takes place, allowing isomerization to intermediate cyclic structures that are different for c- $$\hbox {LLH}^{+}$$ and c- $$\hbox {LDH}^{+}$$ , resulting in different barriers to proton mobility. This effect is related to the protonation of the imidazole ring. It contrasts with the minute stereochemical effects observed for other cyclic dipeptides in which the proton is borne by an amide CO.

The ionization process of chemical warfare agent simulants in low temperature plasma ionization.

The application of low-temperature plasma ionization technology in the chemical warfare agent detection was mostly focused on the research of rapid detection methods. Limited studies are available on the ionization process of chemical warfare agents in low temperature plasma. Through the intensity of protonated molecules of dimethyl methylphosphonate (DMMP) in different solvents including methanol, deuterated methanol (methanol-D4), pure water, and deuterium oxide (water-D2), it was concluded that the water molecule in the air provides the hydrogen ion (H+) needed for ionization. The product ion spectra and the collision-induced dissociation processes of protonated molecules of nerve agent simulants, including DMMP, diethyl methanephosphonate (DEMP), trimethyl phosphate (TMP), triethyl phosphate (TEP), tripropyl phosphate (TPP), and tributyl phosphate (TBP) were analyzed. Results revealed that H+ mostly combined with phosphorus oxygen double bond (P = O) in the low-temperature plasma ionization. By analyzing the peak intensity distribution of product ions of protonated molecules, the presence of proton and charge migration in the low temperature plasma ionization and collision-induced dissociation were researched. This study could provide technical guidance for the rapid and accurate detection of chemical warfare agents through low temperature plasma ionization-mass spectrometry.

Collision-Induced Reductive Elimination of 1,3-Diynes from [MAu24(C≡CR)18]2– (M = Pd, Pt) Yielding Clusters of Superatoms

We studied collision-induced dissociation (CID) processes of alkynyl-protected alloy clusters [MAu24(C≡CR)18]2– (M = Pd, Pt; R = 3,5-(CF3)2C6H3) having an icosahedral M@Au12(8e) superatomic core using mass spectrometry and density functional theory (DFT) calculations. [MAu24(C≡CR)18]2– underwent CID into [MAu24(C≡CR)18–2n]2– (n = 1–6) by sequential desorption of 1,3-diynes (RC≡C–C≡CR). Notably, the number of the valence electrons of the fragments increased by 2 upon every reductive elimination of a single 1,3-diyne. DFT calculations on the [MAu24(C≡CR)16]2– fragment revealed that the increased two electrons are not accommodated into a 1D superatomic orbital, but are localized at the Au2(C≡CR)1 site newly formed on the M@Au12(8e) core from the original Au2(C≡CR)3 unit by the desorption of 1,3-diyne. This desorption step continued to n = 6, leading to the formation of M@Au12[Au2(C≡CR)1]6. Thus, the [MAu24(C≡CR)18–2n]2– fragments can be viewed as clusters of the M@Au12(8e) superatomic core and n units of Au(2e) in terms of the electronic structure. The average number of 1,3-diynes eliminated from the precursor with M = Pd was larger than that from M = Pt, suggesting that Pd doping may facilitate the reductive elimination step of the homocoupling of terminal alkynes by Au cluster catalysts. These results illustrate that the CID is not only a useful probe for elementary steps for catalysis but also a tool for synthesizing novel superatomic compounds.

Gas-Phase Complexes of Americium and Lanthanides with a Bis-triazinyl Pyridine: Reactivity and Bonding of Archetypes for F-Element Separations.

Bis-triazinyl pyridines (BTPs) exhibit solution selectivity for trivalent americium over lanthanides (Ln), the origins of which remain uncertain. Here, electrospray ionization was used to generate gas-phase complexes [ML3]3+, where M = La, Lu, or Am and L is EtBTP 2,6-bis(5,6-diethyl-1,2,4-triazin-3-yl)-pyridine. Collision-induced dissociation (CID) of [ML3]3+ in the presence of H2O yielded a protonated ligand [L(H)]+ and hydroxide [ML2(OH)]2+ or hydrate [ML(L-H)(H2O)]2+, where (L-H)- is a deprotonated ligand. Although solution affinities indicate stronger binding of BTPs toward Am3+ versus Ln3+, the observed CID process is contrastingly more facile for M = Am versus Ln. To understand the disparity, density functional theory was employed to compute potential energy surfaces for two possible CID processes, for M = La and Am. In accordance with the CID results, both the rate determining transition state barrier and the net energy are lower for [AmL3]3+ versus [LaL3]3+ and for both product isomers, [ML2(OH)]2+ and [ML(L-H)(H2O)]2+. More facile removal of a ligand from [AmL3]3+ by CID does not necessarily contradict stronger Am3+-L binding, as inferred from solution behavior. In particular, the formation of new bonds in the products can distort kinetics and thermodynamics expected for simple bond cleavage reactions. In addition to correctly predicting the seemingly anomalous CID behavior, the computational results indicate greater participation of Am 5f versus La 4f orbitals in metal-ligand bonding.

Role of Chemical Dynamics Simulations in Mass Spectrometry Studies of Collision-Induced Dissociation and Collisions of Biological Ions with Organic Surfaces.

In this article, a perspective is given of chemical dynamics simulations of collisions of biological ions with surfaces and of collision-induced dissociation (CID) of ions. The simulations provide an atomic-level understanding of the collisions and, overall, are in quite good agreement with experiment. An integral component of ion/surface collisions is energy transfer to the internal degrees of freedom of both the ion and the surface. The simulations reveal how this energy transfer depends on the collision energy, incident angle, biological ion, and surface. With energy transfer to the ion's vibration fragmentation may occur, i.e. surface-induced dissociation (SID), and the simulations discovered a new fragmentation mechanism, called shattering, for which the ion fragments as it collides with the surface. The simulations also provide insight into the atomistic dynamics of soft-landing and reactive-landing of ions on surfaces. The CID simulations compared activation by multiple "soft" collisions, resulting in random excitation, versus high energy single collisions and nonrandom excitation. These two activation methods may result in different fragment ions. Simulations provide fragmentation products in agreement with experiments and, hence, can provide additional information regarding the reaction mechanisms taking place in experiment. Such studies paved the way on using simulations as an independent and predictive tool in increasing fundamental understanding of CID and related processes.

Fullerene Radiolysis in Astrophysical Ice Analogs: A Mass Spectrometric Study of the Products.

The γ-radiolysis of fullerenes (C60 and C70) was performed to investigate the role of fullerenes as a carbon source in building organic molecules in astrophysical ice analog media. Mass spectrometric analyses and the sequential collision-induced dissociation processes enabled us to determine the plausible chemical structure of new products originated during γ-irradiation of fullerenes. The radiolytic products are grouped into six principal compound families. We assessed the relative yield, as percentage, for each new radiolytic compound, and designed the reaction schemes that lead to γ-irradiation products. The reactions start with the formation of primary radicals due to the radiolysis of solvents that react with the fullerenes' structures, forming fullerene radical adducts. The fate of these fullerene radical adducts depends on two factors: (i) the nature of radicals formed by irradiation of solvents and consequently by their ability to give secondary reactions, (ii) whether the onset of thermalization energy processes occurs or does not occur. Here, we present the results regarding the fragmentation processes that lead to functionalized carbonaceous chains characterized by lower molecular weight. We identify the chemical nature of functionalized chain products, propose the reaction schemes, and quantify their relative yields.

Detection of Aliphatically Bridged Multi-Core Polycyclic Aromatic Hydrocarbons in Sooting Flames with Atmospheric-Sampling High-Resolution Tandem Mass Spectrometry.

This paper provides experimental evidence for the chemical structures of aliphatically substituted and bridged polycyclic aromatic hydrocarbon (PAH) species in gas-physe combustion environments. The identification of these single- and multicore aromatic species, which have been hypothesized to be important in PAH growth and soot nucleation, was made possible through a combination of sampling gaseous constituents from an atmospheric pressure inverse coflow diffusion flame of ethylene and high-resolution tandem mass spectrometry (MS-MS). In these experiments, the flame-sampled components were ionized using a continuous VUV lamp at 10.0 eV and the ions were subsequently fragmented through collisions with Ar atoms in a collision-induced dissociation (CID) process. The resulting fragment ions, which were separated using a reflectron time-of-flight mass spectrometer, were used to extract structural information about the sampled aromatic compounds. The high-resolution mass spectra revealed the presence of alkylated single-core aromatic compounds and the fragment ions that were observed correspond to the loss of saturated and unsaturated units containing up to a total of 6 carbon atoms. Furthermore, the aromatic structures that form the foundational building blocks of the larger PAHs were identified to be smaller single-ring and pericondensed aromatic species with repetitive structural features. For demonstrative purposes, details are provided for the CID of molecular ions at masses 202 and 434. Insights into the role of the aliphatically substituted and bridged aromatics in the reaction network of PAH growth chemistry were obtained from spatially resolved measurements of the flame. The experimental results are consistent with a growth mechanism in which alkylated aromatics are oxidized to form pericondensed ring structures or react and recombine with other aromatics to form larger, potentially three-dimensional, aliphatically bridged multicore aromatic hydrocarbons.

Proton Transfer Accounting for Anomalous Collision-Induced Dissociation of Proton-Bound Hoogsteen Base Pair of Cytosine and Guanine.

To understand the anomalous collision-induced dissociation (CID) behavior of the proton-bound Hoogsteen base pair of cytosine (C) and guanine (G), C:H+∙∙∙G, we investigated CID of a homologue series of proton-bound heterodimers of C, 1-methylcytosine, and 5-methylcytosine with G as a common base partner. The CID experiments were performed in an energy-resolved way (ER-CID) under both multiple and near-single collision conditions. The relative stabilities of the protonated complexes examined by ER-CID suggested that the proton-bound complexes produced by electrospray ionization in this study are proton-bound Hoogsteen base pairs. On the other hand, in contrast to the other base pairs, CID of C:H+∙∙∙G exhibited more abundant productions of C:H+, the fragment protonated on the moiety with a smaller proton affinity, than that of G:H+. This appeared to contradict general prediction based on the kinetic method. However, further theoretical exploration of potential energy surfaces found that there can be facile proton transfers in the proton-bound Hoogsteen base pairs during the CID process, which makes the process accessible to an additional product state of O-protonated C for C:H+ fragments. The presence of an additional dissociation channel, which in other words corresponds to twofold degeneracy in the transition state leading to C:H+ fragments, effectively doubles the apparent reaction rate for production of C:H+. In this way, the process gives rise to the anomaly, the observed pronounced formation of C:H+ in the CID of the proton-bound Hoogsteen base pair, C:H+∙∙∙G. Graphical Abstract ᅟ.

Collision-Induced Dissociation of Undecagold Clusters Protected by Mixed Ligands [Au11(PPh3)8X2]+ (X = Cl, C≡CPh).

We herein investigated collision-induced dissociation (CID) processes of undecagold clusters protected by mixed ligands [Au11(PPh3)8X2]+ (X = Cl, C≡CPh) using mass spectrometry and density functional theory calculations. The results showed that the CID produced fragment ions [Aux(PPh3)yXz]+ with a formal electron count of eight via sequential loss of PPh3 ligands and AuX(PPh3) units in a competitive manner, indicating that the CID channels are governed by the electronic stability of the fragments. Interestingly, the branching fraction of the loss of the AuX(PPh3) units was significantly smaller for X = C≡CPh than that for X = Cl. We ascribed the effect of X on the branching fractions of dissociations of PPh3 and AuX(PPh3) to the steric difference.

Bond dissociation energies in glycine, alanine, and dipeptide deprotonated anions for use in analyzing collision-induced dissociation processes

Enthalpies of product formation for both direct peptide backbone bond dissociation and fragment rearrangement pathways have been predicted at the composite correlated molecule orbital theory G3(MP2) level for the dissociation of the [M−H]− precursor anions of glycine, alanine, the dipeptides, and the amide forms of these species. The lowest energy isomers for bond cleavage and rearrangement pathways were determined by extensive sampling of the available structures for each fragment using density functional theory. The G3(MP2) results are compared to the experimental low-energy collision-induced dissociation (CID) negative ion mode mass spectra. The y1− anion, NH2CHRCO2− was the most intense product ion in the CID spectra for the dipeptide species and their amides. Among amide species, NCO− was universally observed and the enthalpies for generation of this anion are less than ±5 kcal/mol. Amino acids and their amides consistently lost neutral HNCH-R (R H or CH3). Loss of the C-terminal carbon as CO2 was only observed for diglycine and dialanine but loss of CO2 or HNCO were not observed for the amino acids or any of the amide structures. The hydrogen at the C-terminus of the amino acid and dipeptide amide molecules facilitated the observable loss of H2O in the experimental spectra. Loss of H2O was not observed for non-amide species. Several energetically favorable fragmentation pathways were not detected in the low-energy CID mass spectra for these deprotonated anions. Selected transition states were calculated, and show that a number of the observed or low-energy pathways involve multistep mechanisms.

Correlated ion and neutral time of flight technique combined with velocity map imaging: Quantitative measurements for dissociation processes in excited molecular nano-systems.

The combination of the Dispositif d'Irradiation d'Agrégats Moléculaire with the correlated ion and neutral time of flight-velocity map imaging technique provides a new way to explore processes occurring subsequent to the excitation of charged nano-systems. The present contribution describes in detail the methods developed for the quantitative measurement of branching ratios and cross sections for collision-induced dissociation processes of water cluster nano-systems. These methods are based on measurements of the detection efficiency of neutral fragments produced in these dissociation reactions. Moreover, measured detection efficiencies are used here to extract the number of neutral fragments produced for a given charged fragment.

Guided ion beam and theoretical studies of the bond energy of SmS.

Previous work has shown that atomic samarium cations react with carbonyl sulfide to form SmS+ + CO in an exothermic and barrierless process. To characterize this reaction further, the bond energy of SmS+ is determined in the present study using guided ion beam tandem mass spectrometry. Reactions of SmS+ with Xe, CO, and O2 are examined. Results for collision-induced dissociation processes with all three molecules along with the endothermicity of the SmS+ + CO → Sm+ + COS exchange reaction are combined to yield D0(Sm+-S) = 3.37 ± 0.20 eV. The CO and O2 reactions also yield a SmSO+ product, with measured endothermicities that indicate D0(SSm+-O) = 3.73 ± 0.16 eV and D0(OSm+-S) = 1.38 ± 0.27 eV. The SmS+ bond energy is compared with theoretical values characterized at several levels of theory, including CCSD(T) complete basis set extrapolations using all-electron basis sets. Multireference configuration interaction calculations with explicit spin-orbit calculations along with composite thermochemistry using the Feller-Peterson-Dixon method and all-electron basis sets were also explored for SmS+, and for comparison, SmO, SmO+, and EuO.